Networking

Cat6 vs Cat6a vs Fibre for Office Cabling: What to Install

By Ultrateq Systems · Updated

Short answer

For most new offices, Cat6 copper to desks and access points is a good standard, with fibre between floors or buildings. Choose Cat6a if you want reliable 10 Gbps over full 100 m runs. Use fibre for long links, building-to-building connections and noisy electrical environments.

Comparison

CableTypical useMax distanceNotes
Cat5eBasic gigabit100 mFine for existing sites, not ideal for new work
Cat6Offices, PoE cameras and Wi-Fi100 mGood balance of cost and performance
Cat6aFuture-proof, 10 Gbps100 mThicker and costlier, needs careful termination
Fibre (OM/OS)Backbones, long linksHundreds of metres to kilometresImmune to electrical noise, needs SFP or media converters

Practical advice

  • Use pure copper cable, not copper-clad aluminium.
  • Label both ends and keep a patch panel record.
  • Keep power and data cables apart where possible.
  • Leave spare ports and spare conduit for growth.
  • Test every run and keep the test results.

Related

See office Wi-Fi and LAN setup, rack cable management and networking services.

Common questions

Is Cat6a worth it?

If you plan for 10 Gbps or want long-term headroom, yes. For typical offices Cat6 is enough.

Can I use fibre to the desk?

It is possible but usually unnecessary. Use copper at the desk and fibre for backbones.

Does cable colour matter?

Not technically, but colour coding helps manage and troubleshoot.

Talk to a specialist

We'll answer your questions and quote for your site.